Those familiar with construction works or renovations understand how convenient it is to work with a pneumatic jack hammer. But for the first-timers, the use of this tool might seem overwhelming. This guide will walk you through the steps to make using this tool fast and seamless.
Before jumping into your project, be sure to secure the appropriate protective gear. Make sure you are equipped with earplugs or headphones to stop any negative impact to your hearing, safety glasses to preserve healthy vision, and a dust mask to safeguard your respiratory system.
First, attach the air hose to the jack hammer and firmly secure it – this will prevent potential air leaks.
The size of the job you’re planning to take on will determine how much air must be pumped into the tank, which should be proportional to its size.
After achieving maximum capacity, your next step is to activate the jack hammer. Locate the switch along the side and switch it to the “on” command.
The next action is to select the appropriate bit for the project. Based on the material, you must opt for a distinct tool – a chisel bit for concrete, for example.
Begin your drilling project with ease by laying the bit tip against the chosen surface. After that, take a step back and watch as your trusty jack hammer does the heavy lifting.
To reduce the possibility of the drill bit becoming wedged in, be sure to maneuver it variety of places while in use; this allows the bit to avoid being stalled.
When you have completed your drilling task, switch off the jackhammer and unplug the air hose.
Finally, take the time to dispose of any mess that was created from the drilling process.
Working with a pneumatic jack hammer is no daunting task; as long as you prioritize safety, you can complete the job in a short amount of time. Following the appropriate safeguards makes the entire process simple and stress-free.
Short Description: YT29A air-legged rock drills are heavy-duty push-leg (air-legged) rock drills with low energy consumption, which are more suitable for drilling horizontal or inc […]
Short Description: The YT28 air-leg rock drill is a kind of high-efficiency, energy-saving and environmentally friendly rock drilling equipment. Compared with similar pneumatic pro […]
Short Description: The YT27 air-legged rock drill is a highly efficient lightweight rock drill suitable for downward or inclined drilling in medium-hard or hard (f=8 – 18) ro […]
Product description： (S250 jackleg Drill) has been the preferred choice of miners who demand high performance, superior control and lasting reliability. the S250 jackleg allows ope […]
Scope of application: Model S82 air-legged rock drills are heavy-duty air-legged rock drills with high efficiency and low consumption, which are especially suitable for use in the […]
Product introduction Y26 hand-held rock drill is mainly used for drilling shell holes and secondary blasting in mines, railroads, water conservancy, and rock works, which can dry a […]
Product description： Y24 hand-held rock drill is a variant of YT24 air-leg rock drill in our factory. It has the advanced level in China and was rated as the high quality product i […]
Product description： Y20LY hand-held pneumatic leg dual drill is a kind of light rock machinery, which can be used in secondary blasting in mines and quarries as well as in stone w […]
Product Description： Y18 hand – held and air – leg drill is suitable for drilling and blasting holes on soft, medium and hard rocks and W-1.5/4, W-1.8/5, W-2/5 and othe […]