Product knowledge
HOME > News > how thick can electric jack hammer go through
how thick can electric jack hammer go through

An electric jack hammer is the perfect solution when it comes to demolishing surfaces composed of concrete, tile, and other hard materials. This powerful machine can punch through a thickness of up to 6 inches; however, it is not advised that you push it beyond its limit as this may cause damage. Although the electric jack hammer is an effective machine in construction, it still needs to be handled with caution in order to maximize its efficiency and prevent any potential imperfections from occurring.

Using electric power, the electric jack hammer unleashes thousands of strikes each minute to break through various surfaces. Its chisel-like tool may be either flat or pointed, maximizing efficiency when it comes to disrupting concrete or boring through tiles. With effective frequency, this simple mechanism is able to effectively chip away at almost any barrier.

When it comes to determining the power of an electric jack hammer, the depth of the surface should not be overlooked. If the surface is too hard for the jack hammer’s power, it will overheat and stop functioning properly. In general, electric jack hammers can handle surfaces of up to 6 inches in thickness; anything thicker may put too much strain on the machinery, resulting in damage.

Electrical jackhammers may not be able to break down all barriers as, for surfaces up to 8 inches thick, a more powerful tool is needed. The hammer drill and rotary hammer are two viable substitutes that are capable of withstanding surfaces that an electric jack hammer could not.

When tackling surfaces that are thicker than 8 inches, the safest way to proceed is to employ a combination of different tools. A hammer drill can begin the job, piercing the material capablely. Afterwards, an electric jack hammer can be applied to decisively shatter the surface. Although this process takes longer than other alternatives, it ensures no harm is done to the instruments in question.

Ultimately, an electric jack hammer can efficiently tackle demanding surfaces, but should not be employed on surfaces that are thicker than 6 inches; in such cases, multiple tools may be necessary. This resourceful tool can offer lasting durability, but only with the proper upkeep and care.

Powerful and versatile, an electric jackhammer can be employed for a number of projects- from demolition to drilling through thick concrete. The strength of this tool is dependent on the size, weight, and type of motor. A higher grade and more powerful motor will aid in punching through denser materials.

The size and power of an electric jackhammer are crucial when it comes to drilling through materials of various thicknesses. Generally, these tools are built to penetrate everything from thin sheetrock to concrete blocks measuring several inches thick. The exact limit is determined by the strength of the motor and the width of the bit attached.

Electric jackhammers are ideal for most residential demolition and construction endeavors, boasting the capability to penetrate objects up to six inches thick. However, tried and true demolition pros know that reinforced concrete can’t be fazed by these standard tools – something stronger is necessary to break through such material. Enter the more powerful jackhammer, able to blast through up to 12 inches of steel beams, stone and reinforced concrete alike.

Utilizing an electric jackhammer calls for selecting a suitable bit to complete the work correctly. For instance, if breaking through reinforced concrete, then a carbide-tipped bit is necessary to ensure the material isn’t damaged during drilling. Likewise, drilling into stone and brick requires a masonry bit for a successful result.

In selecting your jackhammer bit, the size is essential. The diameter – how thick the bit is – will ultimately decide how much material can be penetrated. Typically, if you’re working on something thin, shoots for a thinner bit. For tougher objects, reach for something more substantial.

To ensure success when drilling through thicker materials, it is essential to select an appropriate bit and to use a careful technique. Pressure should be applied in a steady manner and the speed should be reduced for successful penetration without inflicting damage on either the bit or the material.

Electric jackhammers are amazingly versatile tools, capable of piercing through even the sturdiest of materials ranging from concrete to brick and stone. Now, it all depends on the efficiency of the motor and the size of the bit in use as to how far they will cut. Generally, these jackhammers can make their way through layers up to six inches thick, but those packed with a greater power can even penetrate up to twelve inches in thickness. Of course, when dealing with these thicker surfaces, it is essential that the appropriate drill bit is picked and that the correct technique is employed for successful completion of the job.

  • Previous: equipment rental eletric jack hammer
  • Next:jack hammer bosch gsh 27 vc

  • YT29A Air Leg Pneumatic Rock Drill Pusher Leg Rock Drill

    Short Description: YT29A air-legged rock drills are heavy-duty push-leg (air-legged) rock drills with low energy consumption, which are more suitable for drilling horizontal or inc […]

    YT28 Air Leg Pneumatic Rock Drill Pusher Leg Rock Drill

    Short Description: The YT28 air-leg rock drill is a kind of high-efficiency, energy-saving and environmentally friendly rock drilling equipment. Compared with similar pneumatic pro […]

    YT27 Air Leg Pneumatic Rock Drill Pusher Leg Rock Drill

    Short Description: The YT27 air-legged rock drill is a highly efficient lightweight rock drill suitable for downward or inclined drilling in medium-hard or hard (f=8 – 18) ro […]

    S250 Air Leg Pneumatic Rock Drill Pusher Leg Rock Drill

    Product description: (S250 jackleg Drill) has been the preferred choice of miners who demand high performance, superior control and lasting reliability. the S250 jackleg allows ope […]

    S82 Air Leg Pneumatic Rock Drill Pusher Leg Rock Drill

    Scope of application: Model S82 air-legged rock drills are heavy-duty air-legged rock drills with high efficiency and low consumption, which are especially suitable for use in the […]

    Y26 Handheld Rock Drill Pneumatic Rock Drill

    Product introduction Y26 hand-held rock drill is mainly used for drilling shell holes and secondary blasting in mines, railroads, water conservancy, and rock works, which can dry a […]

    Y24 Handheld Rock Drill Pneumatic Rock Drill

    Product description: Y24 hand-held rock drill is a variant of YT24 air-leg rock drill in our factory. It has the advanced level in China and was rated as the high quality product i […]

    Y20LY Handheld Rock Drill Pneumatic Rock Drill

    Product description: Y20LY hand-held pneumatic leg dual drill is a kind of light rock machinery, which can be used in secondary blasting in mines and quarries as well as in stone w […]

    Y18 Handheld rock drill Pneumatic Rock Drill

    Product Description: Y18 hand – held and air – leg drill is suitable for drilling and blasting holes on soft, medium and hard rocks and W-1.5/4, W-1.8/5, W-2/5 and othe […]

    Product Catalog