Utilized on a daily basis within the construction sector, pneumatic hammer drills are devices designed to bore into concrete plus other masonry materials. Many different specs of these punching tools are available, however the mechanics of how they operate are fundamentally the same.
To begin, you must ascertain the diameter of the hole you are wanting to make. This dimension will decide the size of the drill bit you must procure. Upon obtaining the necessary drill bit, it must then be affixed to the drill’s chuck.
Inserting the drill bit is the next step, requiring you to find its rightful place on the material you are going to bore through. Perfect orientation is required for a snug fit; inaccurately applying the drill bit can cause an imperfect hole. It is fundamental for the drill bit to be perpendicular in order to achieve a desired outcome.
After you’ve situated the drill bit precisely, initiate the process by pulling the trigger. In response, the drill bit will begin to rotate while burrowing into the surface.
When the drill bit begins boring through the surface, the right amount of pressure is necessary for success. This amount will be dependent on the material being drilled into; for example, more power must be applied when excavating concrete than when penetrating soft brick.
With the borehole created, it’s time to disengage the trigger and let the rotating drill bit come to a halt. Then, remove it from the aperture.
Pneumatic hammer drills are must-haves for many construction projects, and, with a few attempts, you can get a hang of using them easily. They really are an incredibly helpful tool.
Short Description: YT29A air-legged rock drills are heavy-duty push-leg (air-legged) rock drills with low energy consumption, which are more suitable for drilling horizontal or inc […]
Short Description: The YT28 air-leg rock drill is a kind of high-efficiency, energy-saving and environmentally friendly rock drilling equipment. Compared with similar pneumatic pro […]
Short Description: The YT27 air-legged rock drill is a highly efficient lightweight rock drill suitable for downward or inclined drilling in medium-hard or hard (f=8 – 18) ro […]
Product description： (S250 jackleg Drill) has been the preferred choice of miners who demand high performance, superior control and lasting reliability. the S250 jackleg allows ope […]
Scope of application: Model S82 air-legged rock drills are heavy-duty air-legged rock drills with high efficiency and low consumption, which are especially suitable for use in the […]
Product introduction Y26 hand-held rock drill is mainly used for drilling shell holes and secondary blasting in mines, railroads, water conservancy, and rock works, which can dry a […]
Product description： Y24 hand-held rock drill is a variant of YT24 air-leg rock drill in our factory. It has the advanced level in China and was rated as the high quality product i […]
Product description： Y20LY hand-held pneumatic leg dual drill is a kind of light rock machinery, which can be used in secondary blasting in mines and quarries as well as in stone w […]
Product Description： Y18 hand – held and air – leg drill is suitable for drilling and blasting holes on soft, medium and hard rocks and W-1.5/4, W-1.8/5, W-2/5 and othe […]
